What is Pro Step 3 Top Coat Liquid?
Pro Step 3 Top Coat is the final and finishing step in your dip powder manicure. This high-shine protective formula seals your manicure, adds a beautiful glossy finish, and protects your nails from daily wear and tear for weeks of flawless color.
Why Top Coat is the Perfect Finish
After you've applied base liquid, dipped in color, activated, and shaped your nails, the top coat is what brings everything together. Our Pro Step 3 Top Coat:
- Provides a brilliant, salon-quality shine
- Creates a protective barrier against chips and scratches
- Seals and locks in your color
- Adds smoothness and a professional finish
- Extends the life of your manicure
How to Use Pro Step 3 Top Coat Liquid
Step 1: Prepare Your Nails
After applying activator and allowing it to cure, buff your nails smooth and wipe away any dust with a lint-free wipe or brush.
Step 2: Apply First Coat
Brush a thin, even layer of Pro Step 3 Top Coat over the entire nail surface, including the edges and free edge. Use smooth, even strokes from cuticle to tip. Its important to move quickly during this step as top coat can begin drying in as little as 5 seconds.
Step 3: Allow to Dry
Let the first coat dry for about 15-30 seconds. The surface should feel dry to the touch before applying the second coat and will have a textured or rough look.
Step 4: Apply Second Coat
For maximum shine and protection, apply a second thin coat of top coat using the same technique. You can be more precise with this step. Our liquid is self leveling.
Step 5: Final Cure
Allow your nails to dry completely for about 1-2 minutes before using your hands. For best results, avoid water contact for at least 30 minutes. If the room or your hands are cold you can place your hands in front of a gentle heat source to ensure proper drying.
Pro Tips for a Flawless Finish
- Thin coats are key: Two thin coats provide better shine and durability than one thick coat
- Cap the edges: Always brush top coat over the free edge to seal and prevent chipping
- Clean brush strokes: Wipe excess product from the brush for smooth, streak-free application
- Don't rush: Allow proper drying time between coats for the best finish
The Benefits of Quality Top Coat
A professional-grade top coat like our Pro Step 3 makes all the difference in your manicure's appearance and longevity. The right formula:
- Dries to a hard, protective finish that resists daily wear
- Maintains clarity and shine without yellowing
- Provides a smooth, glass-like surface
- Protects against UV damage and fading
- Keeps your manicure looking fresh for 3-4 weeks
Caring for Your Top Coat Liquid
To keep your Pro Step 3 Top Coat performing beautifully:
- Store upright in a cool, dry place away from direct sunlight
- Keep the bottle tightly sealed when not in use to prevent thickening
- Wipe the brush and bottle neck clean before closing
- Avoid extreme temperatures that can affect the formula
- Replace every 6-12 months for optimal shine and performance
Troubleshooting Common Issues
Streaky or uneven finish: Apply thinner coats and ensure the previous layer is fully dry before adding another.
Bubbles in the top coat: Avoid shaking the bottle. Roll it gently between your hands instead, and apply with light, even pressure.
Top coat peeling: Make sure you're capping the free edge and that your nails were properly buffed and cleaned before application.
Dull finish: You may need a second coat, or the top coat may be old. Fresh product provides the best shine.
Maintaining Your Shine
To keep your manicure looking freshly done:
- Wear gloves when doing dishes or cleaning
- Moisturize your hands and apply cuticle oil daily
- Avoid using your nails as tools
The Final Touch
Pro Step 3 Top Coat is more than just a finishing step—it's the protective seal that keeps your beautiful dip powder manicure looking salon-fresh for weeks. With the right application technique, you'll achieve that coveted high-gloss finish that makes your nails look professionally done.
For more FAQs, tips and tricks, and liquid care instructions, visit our instructions page or send us an email with any questions!